Controller C10 series

Liên Hệ

Thông tin mô tả

Bộ điểu khiển rung SINFONIA C10 series Variable Frequency Digital Controller C10 series

Liên Hệ

Liên hệ để đc giá tốt nhất

"Gọi 0974400989 để được tư vấn miễn phí"

AME

Cam kết hàng mới 100%
Bảo hành chính hãng

Mr. Hoàng Tấn
Hotline: 0974400989
Email: hoangtan@ame-engineering.com
Ms. Ánh Tuyết
Hotline: 0948998638
Email: anhtuyet@ame-engineering.com

Thông tin kỹ thuật

Bộ điểu khiển rung SINFONIA C10 series - Variable Frequency Digital Controller C10 series

controller C10 series Digital control operated in ‘Analog’ way

A completely new type of digital controller that can be used with the full line-up of feeders, from high frequency mini parts feeders to small electromagnetic feeders and large size models. With ‘analog-style’ operation it can be adjusted very swiftly.

With an auto-tuning function that eliminates the need for frequency adjust-ment, and convenient digital settings and display, drive units can be operated to their full potential.

Features:

1. Auto-tuning function eliminates leafspring adjustment (C10-1VFEF, 3VFEF, 5VFEF)

This digital equipment has a special advanced vibration frequency auto-tuning function. It automatically tracks resonance point changes not only from changes to input volume of workpieces, but also from mechanical changes over time, to deliver optimal vibration at all times. No leaf-spring adjustment or even frequency adjustment is necessary, thereby boosting operation efficiency and saving energy.

2. Digital setting and display makes settings easy to manage

Amplitude, drive frequency, output voltage notches are all set and displayed digitally, for easy management.

3. Constant amplitude control matched to workpieces or materials (C10-1VFEF, 3VFEF, 5VFEF)

Amplitude can be set digitally, and an amplitude sensor allows drive at constant amplitude suited to the workpieces under conveyance.

4. Easy-to-use panel design

The frequency, voltage, soft start, on delay and off delay settings needed for parts feeder adjustment are located on a control panel. A rotary encoder allows ‘analog-style’ setting input to be changed to digital values.

5. Many external control functions

Choice of four speeds can be made by external signal. Two-step control through external regulating resistance. External volume adjustment via a DC4-20mA signal is also possible.

6. CE Marking conformed product

Required to be installed inside the control box treated with Noise filter and IP4X to make product comply to CE Marking.

controller C10 series

Specifications:

Model		C10-1VF	C10-3VF	C10-5VF	C10-1VFEF	C10-3VFEF	C10-5VFEF
Input power source		AC100~120V±10%，AC200~230V±10%，50/60Hz
Output	Control system	PWM system
	Voltage	0~190V (for AC 200V input) 0~95V (for AC 100V input) Automatic switching depending on input power source. Optional unit C10-TR allows output voltage in 0~190V range (Except C10-5VF (EF)) even with AC100V input
	Vibration frequency	Half wave: 45~90Hz, Full wave: 90~180Hz Intermediate wave: 65~120Hz, High frequency: 180~360Hz
	Max. current	1A	3A	5A	1A	3A	5A
Operating modes	Constant Voltage mode	Frequency, output voltage set manually
	Constant amplitude mode	-			Constant amplitude control at set frequency
	Auto-tuning mode	-			With frequency auto-tuning, constant amplitude control requires no amplitude setting
Additional features	Speed selector	Selection of up to 4 amplitude settings by means of external signal
	Start/stop control	Start/Stop control by external signal
	Output signal	Output signal synchronized to parts feeder operation
	Soft start	Start-up time 0.2~4.0 secs
	On/Off delay	-			Delay 0.2~60secs
	Sensor power source	-			For DC 12V, max. 80mA 3P power plug
Synchronized power output	Function	-			Power output synchronized to parts feeder operation (RUN)
	Control system	-			On/Off control
	Output Voltage	-			As power source input to controller
	Max. current	-			2A
Others	Noise tolerant Voltage	Above 1,000V
	Ambient temperature	0~40℃
	Ambient humidity	10~90% (no condensation)
Compatible equipment		ER-25B EA-15, 20 LFBR-350B, 450B, 600B LFB-300, 400, 550 LFG-600, 750, 900 ME-08C, 14C HME-08C, 14 LFB-02, 04 HLFB-02, 04C LF-02, 04 MF-04C, 15C HSE-14	ER-30B, 38B, 45B EA-25, 30, 38, 45 LF-30, 40	ER-55B, 65B, 75B	ER-25B EA-15, 20 LFBR350B, 450B, 600B LFB-300, 400, 550 LFG-600, 750, 900 ME-08C, 14C HME-08C, 14 LFB-02, 04 HLFB-02, 04C LF-02, 04 MF-04C, 15C HSE-14	ER-30B, 38B, 45B EA-25, 30, 38, 45 LF-30, 40	ER-55B, 65B, 75B