Flame Amplifiers

Thông tin mô tả

Commercial Flame Amplifiers

 

Flame Amplifier is a solid state plug-in amplifier that responds to a rectified, optical, ultraviolet or infrared signal.

"Gọi 0974400989 để được tư vấn miễn phí"

AME

Cam kết hàng mới 100%
Bảo hành chính hãng

R7289

Solid state, plug-in units allow use of rectification or ultraviolet flame detection. Use with R4795A,D Flame Safeguard primary controls and appropriate flame detector.

R7290

Solid state, plug-in units allow use of rectification or ultraviolet flame detection. Use with R4795A,D Flame Safeguard primary controls and appropriate flame detector.

R7323

Amplifier for use with Programmers. Includes R4341, R7241 and R4348 Flame Switch. Designed for UV power tubes C7027, C7035, C7044 and C7061. A jack socket is provided for flame current measurement. Includes protection against flame sensor leakage.

R7847

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

R7249

Solid state plug-in units respond to flame detector signal and indicate presence of flame.

R7849

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

R7258

Solid state, plug-in units allow use of rectification, infrared and ultraviolet flame detections. Use with Q518, Q519 and W688A Flame Safeguard multiburner modules and appropriate flame detector.

R7886

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

R7247

Solid state plug-in units respond to flame detector signal and indicate presence of flame.

R7848

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

R7257

Solid state, plug-in units allow use of rectification, infrared and ultraviolet flame detections. Use with Q518, Q519 and W688A Flame Safeguard multiburner modules and appropriate flame detector.

R7259

Solid state, plug-in units allow use of rectification, infrared and ultraviolet flame detections. Use with Q518, Q519 and W688A Flame Safeguard multiburner modules and appropriate flame detector.

R7824

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

R7248

Solid state plug-in units respond to flame detector signal and indicate presence of flame.

R7861

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

R7061

SOLID STATE DYNAMIC SELF CHECK AMPLIFIER. USED WITH UV DYNAMIC SELF CHECK SENSOR C7061.

FSP

The FSP5075A Flame Amplifier Modules accept various Honeywell plug-in flame signal amplifiers. Depending on the type, the flame amplifier module work with ultraviolet flame detectors, infrared flame detectors, rectifying flame rods or photocells.

R7476

Solid state plug-in units respond to flame detector signal and indicate presence of flame.

R7851

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

R7852

SOLID STATE PLUG-IN NON-SELF CHECKING INFRARED AMPLIFIER WHICH AMPLIFIES A SMALL ELECTRICAL SIGNAL GENERATED BY A FLAME TO PRODUCE THE FLAME-ON/FLAME-OFF SIGNAL. DESIGNED TO WORK WITH THE C7915A IR FLAME DETECTOR.

Flame Amplifier Parts and Accessories

Tin tức nổi bật

Top